Frequently Asked Questions

Read below to learn the answers to common questions. If you need more help, please contact our support team, and we’ll be happy to assist you.

 

What kinds and sizes of printers can BuzzBox support?

> Currently BuzzBox can support the following printers: Afinia H479. Afinia H480, PP3DP UP! Plus and PP3DP UP! Plus 2. It may support other printers with operating (mechanical working area) dimensions of less than 13″ x 18″ x 15″ (Width x Height x Depth).  If there is another printer that you think that can fit inside BuzzBox, contact the support team and we’ll be happy to assist you. The removal of spool holders and some accessories attached to your printer may be necessary to support BuzzBox.

What are the internal dimensions of BuzzBox?

> Internal dimensions are approximately 13.3″ x 18.4″ x 15.7″ (Width x Height x Depth). To check more dimension and specifications, please refer to the Tech-Specs page.

How does BuzzBox reduce fumes generated from the 3D printing process?

> BuzzBox contains a simple air filtering system that can operate passively or actively. In both methods, carbon activated filters are used to extract and contain most of the fumes generated, especially ABS plastic fumes. The passive system allows operates by letting the heat generated from the printing process by drawing air through the inlet filter, located on the right side, through to the outlet filter, located on top. An active system utilizes a 120mm low speed fan to assist the filtering process and guide the fumes to the filter, this can be more effective than the passive approach. Both passive and active methods are shown in our promotional literature.

How does BuzzBox reduce part warpage?

> Since BuzzBox is fully enclosed, it reduces or in most cases, eliminates ambient air drafts that can cause part warpage. The enclosure also contains the heat generated from the printing process to form a near consistent temperature environment. Since many factors contribute to part warpage, you may have to adjust or calibrate your machine to achieve satisfactory results.

How hard is it to assemble?

> It is very simple and comes with a step by step manual. Our intention is make the process as easy as possible with well documented pictures and part numbers. If you need the manual, refer to our downloads section.

Can I print or modify parts of BuzzBox myself?

> By all means, yes! We encourage customer driven, open-source creativity. If you would like to share your model files or improvements with the community, please send an STL model file to our support team or link to it via BuzzBox’s Thingiverse page and we’ll post it to our downloads section.

Are there hole patterns for the part mount points?

> Yes, you will find them in the downloads section.

Can I become a re-seller BuzzBox products?

> Please contact us if you are interested in becoming a re-seller of our products.

UA-51713451-1